High Power Prototyping
Development Inverter Stack 100 kW
DIS power module is a modular inverter capable of driving three-phase motor from DC power supply. Designed for fast and easy implementation using dSPACE© connectivity. Hardware protections embedded in inverter ensure safety to test control algorithms for embedded applications. Equipped with Staubli connections for water cooling, it can be used as a very high-power system such as up to 100 kW. Typical applications include Electric Vehicle Motor controllers, Educational and Industrial Supplies.
Different versions are available:
DIS-R3-450-400-CTRL includes Power Stack, Controller, Pre-programmed Firmware: full system ready to drive a motor with hundreds of parameters to tune the controller.
DIS-R3-450-400 includes Power Stack only: motor control to be done via an external real-time control target. Plug and play with dSPACE© MicroLabBox, compatible with Speedgoat©, Opal-RT© rapid development systems.
DIS-R3-450-400-CTRL-MBD includes Power Stack, Controller, Firmware as a provided Simulink Model: full system ready to drive a motor. The control loop is easy to customize via a Simulink Model and Embedded Coder code generation.
in a single 19” rack (3U)
100kW rated power inverter
up to 450 V
DC Link capacitor included
including programmable OVLO and OCP
Integrated forced water cooling
The market proposes several real-time targets to run Simulink models, obtaining measurement and controlling IOs. However, power is typically limited to a few watt, and the voltage to a few volts. DIS enables engineers to run their Simulink model using a real power stage, at full power. The DIS can run high power motor and qualify their algorithm.